camera_scanner_kit changelog

1.2.0 #

Dependency: Upgraded native_haptics_and_audio to ^2.0.0. If your app also depends on it directly, bump your own constraint to ^2.0.0 — otherwise this release will not resolve.
Fix (Audio): The scanner beep is now preloaded and pinned at startup. 2.0.0 changed initialize() to load no audio, so the first scan of a session would otherwise decode its beep on the hot path, losing the zero-latency guarantee.
Fix (Audio): Scan feedback is no longer dropped when a barcode is read before the audio engine finishes initializing. Playback now defers onto the warm-up instead of silently no-opping.
Fix (Inline Scanner): BarcodeScannerView now detaches its BarcodeScannerController in dispose(), and rebinds a swapped controller via didUpdateWidget. Previously a controller that outlived the view threw setState() called after dispose() on a later start(), stop() or toggle().
Fix (ScannerScreen): The same-item cooldown now uses a monotonic Stopwatch instead of DateTime.now(), so an NTP sync or a device time/timezone change can no longer freeze or skip it.
Perf: enableSoundAndVibration: false no longer initializes the native audio engine or loads any audio. Note this value is read once in initState; changing it at runtime requires a remount.
Documentation: Added a Sound & Haptics section to the README covering the shared audio engine and respectSilentSwitch — which the host app must set in main() for scanner beeps to survive the iOS hardware ringer switch. Also repaired several broken DartDoc references.
Chore: Migrated to the 2.0.0 API (PosSound → NativeSound, PosHaptic → HapticPattern, playSound() → play()) and modernized analysis_options.yaml for Dart 3.11.
Chore: Corrected the Flutter constraint from >=1.17.0 to >=3.41.0. The old bound was unenforceable — the Dart constraint already required Flutter 3.41 — so this excludes no one who could install 1.1.6.

1.1.6 #

Dependency: Upgraded native_haptics_and_audio to ^1.1.0 to inherit its new SwiftPM iOS architecture, Android Built-in Kotlin compatibility, and hardened initialize() concurrency guards.
Dependency: Upgraded mobile_scanner to ^7.4.0.
Fix: Wrapped _effects.initialize() calls in unawaited() to satisfy unawaited_futures linting on the new async signature.

1.1.5 #

Fix: Added isTransitioning idempotency guards to start() and stop() in BarcodeScannerController to prevent redundant hardware toggle attempts during active transitions.
Feature: Exposed detach() on BarcodeScannerController to safely release the hardware bindings without fully disposing the controller, useful for complex tab-switching rebuilds.
Fix: Corrected an inconsistent logging tag in BarcodeScannerView for background lifecycle events.
Test: Added unit tests covering the idempotency guarantees of the BarcodeScannerController.
Documentation: Clarified the safe programmatic pop architecture in PosBarcodeScannerScreen.

1.1.4 #

Fix: Resolved an async disposal race condition in BarcodeScannerController where notifyListeners() could fire after dispose() if the parent widget was torn down during the UX transition padding delay. The controller now tracks its own disposal state and silently drops stale callbacks.

1.1.3 #

Refactor (Lifecycle Management): Migrated BarcodeScannerView lifecycle handling from WidgetsBindingObserver to Flutter's modern AppLifecycleListener API, improving listener disposal and memory safety.
Feature (Inline Scanner): Added stopCameraOnBackground parameter (defaults to true) to BarcodeScannerView, giving developers granular control over automatic camera hardware teardown when the application transitions to background states.

1.1.2 #

UI (Theme Isolation): Refactored internal action buttons to use primitive Material and InkWell widgets, isolating them from legacy global useMaterial3: false theme overrides in host applications.
UI (Modals): Scoped all modal bottom sheets (like the Scanned Items list) inside a clean Material 3 Theme widget to ensure perfect typography, colors, and border rendering regardless of the parent app's legacy theme matrix.
Fix: Resolved a runtime Material AssertionError crash caused by conflicting type and shape parameters on circular buttons.

1.1.1 #

Fix: Resolved a "zombie stream" deadlock where the barcode EventChannel would silently fail to receive frames after the device was locked and unlocked.
Fix (ScannerScreen): Implemented a 250ms hardware release delay on AppLifecycleState.resumed to prevent native camera lockups, securely guarded by the _isPopping tripwire.
UX (Inline Scanner): The BarcodeScannerView now automatically closes its UI and safely detaches from the sensor when the app goes to the background, improving user privacy and preventing battery drain.

1.1.0 #

Feature: Added ScannerLensType enum to provide hardware-level control over the physical camera lens. Prevents autofocus "jumping" on iOS Pro models by allowing developers to lock the ultra-wide lens.
Feature: Exposed the initialZoom parameter across all scanner entry points. Defaulted to null to respect native OS behaviors.
Refactor: Completely restructured internal package architecture into strict domain folders (inline_scanner, scanner_screen, prebuilt_screens, and widgets).
Documentation: Added comprehensive, production-grade DartDocs to all public APIs, detailing hardware fragmentation warnings and architecture requirements.

1.0.2 #

Feature: Added idempotent start() and stop() methods to BarcodeScannerController for safer programmatic lifecycle control.
Fix: Resolved a microtask collision and debug-mode breakpoint caused by OS Camera Permission dialogs interrupting the camera boot sequence.
UI Refactor: Generalized BarcodeScannerView. Replaced hardcoded UI constraints by exposing borderRadius, removing redundant clipping masks, and enforcing compositional padding.
Polish: Upgraded internal logs to strict enterprise format and improved public API DartDocs.

1.0.1 #

Fix pub.flutter-io.cn description length warning to improve search engine SEO and package scoring.

1.0.0 #

Initial Stable Release of camera_scanner_kit.
9-in-1 Routing Matrix: Modular API providing 9 scanning combinations (Single Scan, Batch accumulation, and real-time Stream routing across Custom, Barcode, and QR Code views).
POS Mode: Dedicated PosBarcodeScannerScreen featuring built-in quantity adjustment controls (+/-), success/error haptic feedback, and a reactive badge showing scanned item summaries in a sheet.
Inline Mode: Embeddable, inline BarcodeScannerView with smooth collapsible window blind animations, flashlight toggles, and automatic teardown on inactivity timeout.
Teardown & Lifecycle Protection: Hardware-safe tripwire system to prevent deactivated-widget crashes, ghost scans, and camera locks across Android and iOS lifecycle transitions.

0.0.0 #

Internal Alpha Release.
Extracted core scanning logic into a modular package architecture.
Implemented 9-in-1 routing matrix (Single, Batch, Stream, etc.).
Added PosBarcodeScannerScreen with quantity increment/decrement controls.
Standardized UI components (Overlays, Connected Toolbars, Error Widgets).
Prepended library logs with [CameraScannerKit] for easier debugging.

camera_scanner_kit 1.2.0
camera_scanner_kit: ^1.2.0 copied to clipboard

Metadata

1.2.0 #

1.1.6 #

1.1.5 #

1.1.4 #

1.1.3 #

1.1.2 #

1.1.1 #

1.1.0 #

1.0.2 #

1.0.1 #

1.0.0 #

0.0.0 #

← Metadata

Documentation

Publisher

Weekly Downloads

Metadata

Topics

License

Dependencies

More

camera_scanner_kit 1.2.0 camera_scanner_kit: ^1.2.0 copied to clipboard

Metadata

1.2.0 #

1.1.6 #

1.1.5 #

1.1.4 #

1.1.3 #

1.1.2 #

1.1.1 #

1.1.0 #

1.0.2 #

1.0.1 #

1.0.0 #

0.0.0 #

← Metadata

Documentation

Publisher

Weekly Downloads

Metadata

Topics

License

Dependencies

More

camera_scanner_kit 1.2.0
camera_scanner_kit: ^1.2.0 copied to clipboard